黃色三級片请播放

<code id="qyg24"></code>
<u id="qyg24"><label id="qyg24"></label></u><input id="qyg24"></input>
  • <menu id="qyg24"><acronym id="qyg24"></acronym></menu>
  • 全國服務熱線:

    18396804865 錢經理

    便攜式數控切割機電流調節掌控要點

    2019-10-14 16:59:30文章來源:www.o272.com587

    便攜式數控切割機:在正確使用進行高質量的快速切割的時候,必須對切割工藝參數進行深刻地理解和掌握,只有這樣的情況下才能使等離子切割設備發揮其最大功效,其切割的工件也會達到最佳的效果,下面就為大家講解一下等離子數控切割機在切割工件工作時機用等離子電源的切割電流調節參數,供廣大用戶參考學習.

    Portable CNC Cutting Machine: In the correct use of high-quality fast cutting, we must have a profound understanding and mastery of cutting process parameters. Only in this case can plasma cutting equipment play its greatest role, and its cutting workpiece will achieve the best results. Here we will explain the CNC plasma cutting machine used in cutting workpiece and so on. The cutting current parameters of ion power supply can be used for reference and learning by users.

    在等離子數控切割機切割工件時,關于機用等離子電源的切割電流調節問題至關重要,它是最重要的切割工藝參數,直接決定了切割的厚度和速度,即切割能力.關于造成的影響,直接表現為以下幾點等離子數控切割機的切割電流的選擇形式:

    In the process of cutting workpiece by plasma numerical control cutting machine, the problem of cutting current regulation of plasma power supply is very important. It is the most important cutting process parameter, which directly determines the thickness and speed of cutting, i.e. cutting ability. As for the impact, it is directly shown in the following selection forms of cutting current of plasma numerical control cutting machine:

    1、等離子數控切割機的切割電流的增大,等離子電弧能量增加,切割能力提高,切割速度是隨之增大;

    1. With the increase of cutting current, plasma arc energy and cutting ability, the cutting speed of plasma numerical control cutting machine increases.

    2、等離子數控切割機的切割電流增大,等離子電弧直徑增加,電弧變粗使得切口變寬;

    2. The cutting current of plasma NC cutting machine increases, the diameter of plasma arc increases, and the arc becomes thicker, which makes the cut wider.

    3、等離子數控切割機的切割電流過大使得噴嘴熱負荷增大,噴嘴過早地損傷,切割質量自然也下降,甚至無法進行正常割.所以在切割前要根據材料的厚度正確選用切割電流和相應的噴嘴.

    3. The excessive cutting current of plasma NC cutting machine makes the heat load of the nozzle increase, the nozzle damage prematurely, and the cutting quality naturally decreases, even the normal cutting can not be carried out. So before cutting, the cutting current and the corresponding nozzle should be selected correctly according to the thickness of the material.http://www.o272.com


      濟南卓然天成是大型數控火焰切割機廠家,數控等離子切割機廠家,便攜式數控切割機廠家www.o272.com,供應河北數控火焰切割機,山西數控等離子切割機,遼寧便攜式數控切割機,吉林數控火焰切割機,黑龍江數控等離子切割機,江蘇數控切割機,浙江數控切割機,安徽數控切割機,福建切割機,江西切割機,山東數控切割機,臺灣切割機,河南切割機,湖北數控切割機,湖南數控切割機,廣東切割機,海南數控切割機,四川數控切割機,貴州數控切割機,云南切割機,陜西切割機,甘肅數控切割機,青海數控切割機,需要的朋友聯系我們15254176866

    電話咨詢
    郵件咨詢
    在線地圖
    QQ客服
    網站地圖 黃色三級片请播放
    <code id="qyg24"></code>
    <u id="qyg24"><label id="qyg24"></label></u><input id="qyg24"></input>
  • <menu id="qyg24"><acronym id="qyg24"></acronym></menu>